Aluminum water filter is a glass fiber filter for cast aluminum. It uses high -twist and high -strength alkali -free glass fiber woven and has been treated with special later treatment. The surface is coated with high temperature resistance. Suitable for aluminum water filtration.
Aluminum Water Filter is widely used in filtering such as car and motorcycle wheels, cylinder pistons, aluminum rods, aluminum, aluminum ingot, aluminum plates, and aluminum alloy parts.
Aluminum water filter can effectively remove bubbles and residue in aluminum liquid, which greatly improves product quality.
Aluminum liquid contacting air is easily oxidized to produce impurities such as oxide. At the same time, aluminum castings often have high quality requirements, so the use of filtering is very effective.
Aluminum water filter can be used for most types of aluminum alloy casting, and used in sand casting, permanent molds, shell molds, molding and molten mold casting, which can effectively remove impurities, reducing turbulence, removing bubble bubbles , Thereby improving the quality of castings and reducing production costs.
Aluminum water filter does not pollute aluminum liquid, does not affect the chemical properties of metal. At present, a large number of manufacturers use iron wire mesh as filter materials, but due to the existence of a large amount of iron The mouth and portrait can only be treated as waste aluminum,
The use of aluminum water glass fiber filter can be directly returned to the furnace to reinstate, thereby reducing costs.
Glass fiber is a very fine fiber made of molten glass. It has the advantages of insulation, heat resistance, good corrosion resistance, and high mechanical strength.
The main components of glass fiber are silicon, alumina, calcium oxide, boron oxide, magnesium oxide, sodium oxide, etc.
Use glass balls or waste glass as raw materials through high -temperature melting, brushed, collateral, weaving and other processes to make all kinds of products.
The diameter of glass fiber single silk is usually equivalent to 1/20 to 1/5 of a hair wire. Each fiber fiber is made of hundreds or even thousands of single silk.
It is usually used as enhanced materials, electrical insulation materials, thermal insulation materials, circuit substrates, etc. in composite materials, which are widely used in multiple fields.
Alkali -free glass fiber filter has the advantages of high strength, good toughness, and impact resistance. It can be arbitrarily cut into various specifications and styles, flexible and free combinations, suitable for cast aluminum crafts in various environments in various environments
Low cost, easy to use
The grid is flat, the filtration effect is good
Reduce the turbulence and reduce air bubbles
Reduce waste
Remove oxide and residue
Improve the distribution of metal
The filter should be placed on the lane that is closer to the icing cavity as much as possible, so that there can be more floating sand in the lane.
The filter is recommended on the type of types that are packed up and down, so that the operation is simple and the effect is good. At this time Resistance to iron water.
When the lane cannot be overlapped for some reasons, the filter can be placed on the horizontal section of the horizontal or inner tract. At this time, the lane must be on the box. Because the mixed objects flow in the upper part of the metal solution, the lower gap of the net does not affect the residue blocking, but when the cross -sectional area of the lane is too large or too wide, the filter will be deformed at high temperature, causing the lower gap to be too large and affecting the slag resistance effect.
The placement of the filter in the pouring system should be fixed and reliable to prevent the shock of the metal liquid and affect the residue effect. Generally, the part of the filter-type sand pressure edge is: 15mm per side of the wet watering system. If it is buried in the lane, it can be slightly smaller on each side, and the dry type is 20-30mm per side.
Thick & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;: 1.5mm
Metable & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;: 18/16/14/12/10/88
Work temperature & nbsp; & nbsp; & nbsp;: 700 ~ 800 ℃
Softening temperature & nbsp; & nbsp; & nbsp;: 900 ℃
Kazhong & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;: 150-350g/㎡
& nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;
Weaving & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;
Application Type:
Chengjiao mesh (white, coating or acrylic coating): can be fixed in aluminum stream grooves for aluminum ingot, aluminum rod, aluminum plate belt and other continuous casting workshops
Cutting mesh (brown, coating resin coating): square or circular mesh of cutting according to the size of the demand, for filtering of aluminum castings, placed in the pouring system
" cylindrical, hat -type and other special shapes (brown or black, coated resin or carbonized treatment): for low -pressure casting, such as aluminum alloy wheels, engine cylinder head, etc.
Smokeless (black, carbonized treatment): During the filtration process, it is not burned, smokeless, low -yielding, and is used for casting with high quality requirements such as aluminum alloy piston
