Or a round mesh.
It can greatly reduce defects such as slag, sand eye, pores, and reduce the production rate of casting waste.Reduce the amount of casting processing and improve the cutting performance.Improve the mechanical performance of casting
Simplify the pouring system and save metal
Rectification, reducing the flowing fluid, and reducing the production of casting bubbles
Precautions: -Sizing: border-box; " />The filter should be placed on the lane closer to the separation cavity, so that there can be more floating sand in the lane.
The filter is placed on the typical surface of the upper and lower packets. This is easy to operate and the effect is good. At this time, the lane in the direction of the water should be used as much as possible, which is conducive to the floating of the mixed objects and reduce the resistance to the iron water.
When the lane cannot be overlapped for some reasons, the filter can be placed on the horizontal section of the horizontal or inner waterway. At this time, the lane must be on the box. Because the mixed objects flow in the upper part of the metal solution, the lower gap of the net does not affect the residue blocking, but when the cross -sectional area of the lane is too large or too wide, the filter will be deformed at high temperature, causing the lower gap to be too large and affecting the slag resistance effect.
The placement of the filter in the pouring system should be fixed and fixed, and the shock of the metal liquid is placed and the slag resistance effect is affected. Generally, the section of the filter-type sand-type pressure edge is: 15mm per side of the wet water pouring system. If it is buried in the lane, each side can be slightly smaller, and the dry type per side is 20-30mm.
Product selling point:
The oxidation bubble bubble ceramic filter has higher impact strength than silicon carbide ceramics, high high temperature resistance characteristics, tolerance temperatures exceeding 1700 ° C, meet the requirements of cast steel, micron -level filtration capacity, strong chemical stability, strong chemical stability It is generally suitable for cast aluminum, cast copper, cast steel cast iron, various black and non -ferrous metals and its alloy casting. The filtration effect is stable, effectively reducing casting bubbles, sand sandwiches, and residue. Smooth, reduce machine processing loss, reduce production costs, and increase comprehensive productivity.
